Viper 50000569, Quick Start Manual, Page: 4 / 429

QUICK START GUIDE ENGLISH
1
INTRODUCTION
CAUTION!
Some general and detailed machine information is not included in this guide.
Please refer to QUICK START GUIDE Manual on supplied CD-ROM reading by Adobe
®
Reader
®
.
NOTE
The numbers in brackets refer to the components shown in Machine Description chapter.
GUIDE PURPOSE AND CONTENTS
The purpose of this quick start guide is to provide the operator with all basic information to use the machine properly.and For information
about technical characteristics, operation, machine inactivity, spare parts and safety conditions etc, please refer to QUICK START
GUIDE manual on supplied CD-ROM.
Before performing any procedure on the machine, the operators and qualified technicians must read the quick start guide Contact our
company in case of doubts concerning the interpretation of the instructions or for any further information.
HOW TO KEEP THIS QUICK START GUIDE
The quick start guide must be kept near the machine, inside an adequate case, away from liquids and other substances that can cause any
damage to it.
DECLARATION OF CONFORMITY
Declaration of Conformity is supplied with the machine and certifies machine conformity with the law in force.
NOTE
The copies of the original declaration of conformity are provided together with the machine documentation.
ACCESSORIES AND MAINTENANCE
All the necessary operation, maintenance and repair procedures must be made by qualified personnel, our company appointed repair
center. ONLY original or approved spare parts and accessories can be used.
Contact our company customer service for any service or purchase of accessories or spare parts if necessary.
CHANGE AND IMPROVEMENT
We committed to continuous improvement of its products, the company reserves the right to the machine changes and improvements
without informing in additional.
SCOPE OF APPLICATION
The scrubber applies to commercial and industrial use. It is suitable for cleaning smooth and solid floor, operating by qualified personnel
in safety circumstance. It is not suitable for outdoor use or carpet or rough floor cleaning.
MACHINE IDENTIFICATION DATA
The machine serial number and model name are marked on the serial label.
This information is useful. Use the following table to write down the machine identification data when requiring spare parts for the
machine.
MACHINE MODEL...........................................................................
MACHINE SERIAL NUMBER.........................................................