background image

19

© 2015 Directed. All rights reserved.

9. AUX 2 Output Type

•  Refer to AUX 1 Output Type descriptions.

10. AUX 2 Linking 

•  Refer to AUX 1 Linking descriptions.

11. AUX 3 Output Type

•  Refer to AUX 1 Output Type descriptions.

12. AUX 3 Linking 

1.  Options 1-4: Refer to AUX 1 Linking descriptions.
2.  Option 5: SmartKey Control (Link to Remote Start OFF): The AUX output will pulse once following 

Remote Start shut down for vehicles with push button engine stop operations. During runtime, if any 
door is opened the remote start will shut down immediately and pulse the output.

13. AUX 4 Output Type

•  Refer to AUX 1 Output Type descriptions.

14. AUX 4 Linking 

•  Refer to AUX 1 Linking descriptions.

15. Aux/Trunk Output Type

•  Refer to AUX 1 Output Type descriptions.

Menu 3 - Remote start

Item Feature

Opt. 1

Opt. 2

Opt. 3

Opt.4

Opt. 5+

1

Transmission Mode

Manual

Automatic

2

Engine Checking Mode

Virtual Tach

Voltage

OFF

Tachometer

3

Cranking Time (seconds)

0.6 sec.

0.8 sec.

1.0 sec.

1.2 sec.

1.4 (5)/ 1.6 
(6)/ 1.8 (7) 2.0 
(8)/ 4.0 (9)

4

Remote Start Runtime (minutes)

12 min.

24 min.

60 min.

5

Activation Pulse Count

1

2

6

Turbo Mode (minutes)

No Turbo 

Mode

On-1 min.

On-3 min.

On-5 min.

On- 10 min.

7

Timer Mode Runtime

12 min.

3 min.

6 min.

9 min.

8

Flex Relay Function

Ignition 2 

Accessory 2

Starter 2

9

Diesel Start Delay (seconds)

Wait-to Start 
input

Timed 15 sec.

Timed 30 sec.

Timed 45 sec.

10

Accessory during Diesel Start 
Delay 

On

OFF

11

Status 2 Output

Status 

Latch Rear 
Defogger

Pulse Rear 
Defogger

12

Parking Light Output 

Constant

Pulsed OFF

13

Anti-grind Output

ON

OFF

14

Tach Mode Starter  Release 

Normal

Increase

Decrease

15

Vehicle Temp Auto Report*

OFF 

On

16

Remote Start Safelock

OFF

On

* Not available with with the 1-way remote control.

Summary of Contents for 4811V


























































Reviews: