Viper 1000 Owner'S Manual Download

Page: 35 / 45

If the system has entered the triggered sequence (siren has begun

chirping), pressing the disarm button of the transmitter will not

disarm VRS

. To disarm the VRS

during a VRS

trigger sequence:

1. Turn the ignition on.

2. Press the Valet button the pre-

programmed number of times to

disarm the VRS

system.

prro

grra

miin

g o

pttiio

nss

See your dealer for further details on the options listed below

available with this system.

Automatic Engine Disable

: Prevents the vehicle from being started

even if the vehicle is not armed after turning the ignition Off and

exiting the vehicle.

Comfort Closure

: Windows will close upon locking the vehicle.

Dual Sensor Trigger

: If programmed both the onboard and at

least one of the optional sensors need to be triggered within 1-

second of each other for full alarm.

note:

If the VRS

system has begun its chirping sequence,

the ignition must be turned off, then on to disarm. If you
are driving the vehicle at the time, pull to a safe place
away from traffic and follow the triggered sequence dis-
arm procedure.

DRW-35

Summary of Contents for 1000














































Search results

Summary of Contents for 1000

Reviews:

Related manuals for 1000

Brands by name

Popular brands

Viper 1000, Owner'S Manual

Search results

Summary of Contents for 1000

Reviews:

Related manuals for 1000

Brands by name

Popular brands