29
© 2 0 0 5 d i r e c t e d e l e c t r o n i c s , i n c .
p
prro
og
grra
am
mm
miin
ng
g
Programming options control what your system does during
normal operation, and require few or no additional parts.
However, some may require additional installation labor.
The following is a list of the program settings, with the factory
settings in B
Boolld
d::
➤
A
Accttiivvee aarrm
miin
ngg (only with the transmitter) or passive arming (au-
tomatic arming 30-seconds after the last door has been closed).
➤
Arming/disarming confirmation siren chirps oon
n or off.
➤
The ignition controlled door lock feature oon
n or off: With
this feature on, the doors will lock three seconds after the
ignition is turned on, and the doors closed, and unlock
when the ignition is turned off. The system will not lock the
doors when the ignition is turned on with any door open. If
your installer is programming the security system with the
Directed Bitwriter
®
, ignition lock and unlock are indepen-
dent features and can be programmed separately.
➤
Passive door locking (with passive arming) or aaccttiivvee d
doooorr
lloocckkiin
ngg (only when arming with the transmitter). Passive
locking allows the vehicle's doors to lock when the security
system passively arms (after the 30 second countdown). This
feature only works if passive arming has been programmed.
