If only the User's password is set, then this is a power on password
and must be entered to boot or enter setup. In Setup the user will
have administrator rights.
Select this to reconfigure the administrator’s password. Your pass-
word must contain at least 3 characters and should be maximal 20
characters long.
Select this to reconfigure the user’s password. Your password must
contain at least 3 characters and should be maximal 20 characters
long.
4.7 Save and exit
To save the changes and exit the setup utility, select this field then
press
[Enter]
. A dialog box will appear. Confirm by selecting [Yes].
You can also press
[F4]
to save and exit setup.
If ONLY the User's
password is set
Administrator Password
User Password
Save Changes and Exit
VIPA HMI Panel PC
BIOS setup
Save and exit
HB160 | PPC | 67S-PNL0 | GB | 14-24
45