This section configures the number of seconds to wait for the setup
activation key.
This allows you to determine the default state of the numeric keypad.
On - (default) The function of the numeric keypad is the number
keys.
Off - The function of the numeric keypad is the arrow keys.
Enabled - (default) Displays OEM logo instead of the POST mes-
sages.
Disabled - Displays normal POST messages.
Upon
Request
- GA20 can be disabled using BIOS services.
Always
- Do not allow disabling GA20; this option is useful
when any RT code is executed above 1MB.
This field is used to set display mode for Option ROM.
Allows Option ROMs to trap Interrupt 19 when enabled.
Adjust the boot sequence of the system.
Sets the order of the legacy devices in this group.
4.6 Security
If only the Administrator's password is set, then this only limits access
to setup and is only asked for when entering setup.
Setup Promt Timeout
Bootup NumLock State
Quiet Boot
GateA20 Active
Option ROM Messages
Int19 Trap Response
Boot Option Priorities
Hard Drive BBS Priori-
ties
If ONLY the Administra-
tor's password is set
VIPA HMI Panel PC
BIOS setup
Security
HB160 | PPC | 67S-PNL0 | GB | 14-24
44
