Manual VIPA System 200V
Chapter 3 Deployment CPU 21x-1Bx06
HB97E - CPU - RE_21x-1Bx06 - Rev. 13/20
3-15
Hints for configuring a MPI interface are to find in the documentation of
your programming software.
The "Green Cable" has the order number VIPA 950-0KB00.
Attention!
Please regard, that you may use the "Green Cable" exclusively at VIPA
CPUs with MP
2
I-interface!
Please regard the hints for deploying the Green Cable and the MP
2
I jack!
•
Connect your PC to the MPI jack of your CPU via a MPI programming
cable.
•
Load your project in the SIMATIC manager from Siemens.
•
Choose in the menu
Options
>
Set PG/PC interface
•
Select in the according list the "PC Adapter (MPI)"; if appropriate you
have to add it first, then click on [Properties].
•
Set in the register
MPI
the transfer parameters of your MPI net and type
a valid
address
.
•
Switch to the register
Local connection
•
Set the COM port of the PC and the transfer rate 38400Baud for the MPI
programming cable from VIPA.
•
Via
PLC
>
Load to module
you may transfer your project via MPI to the
CPU and save it on a MMC via
PLC
>
Copy RAM to ROM
if one is
plugged.
Note!
Please make sure to adjust the transfer rate to 38400Baud when using the
"Green Cable" from VIPA.
Configure MPI
Approach transfer
via MPI interface
Summary of Contents for CPU 214
Page 1: ...VIPA System 200V CPU Manual HB97E_CPU RE_21x 1Bx06 Rev 13 20 May 2013...
Page 4: ...Contents Manual VIPA System 200V ii HB97E CPU RE_21x 1Bx06 Rev 13 20...
Page 8: ...Safety information Manual VIPA System 200V 4 HB97E CPU RE_21x 1Bx03 Rev 13 20...
Page 26: ...Chapter 1 Basics and Assembly Manual VIPA System 200V 1 18 HB97E CPU RE_21x 1Bx06 Rev 13 20...