Event ID
Description
DatID : Output address
DatID : Station not available
DatID : Station available
0xEC30
EtherCAT: Topology OK
ZINFO2 : Diagnostics address of the master
0xEC40
Bus cycle time violation cancelled
ZINFO2 : Logical address of the IO system
0xEC50
EtherCAT: DC out of sync
OB : Operation mode
0: Configuration in operation mode RUN
1: STOP (update)
2: STOP (overall reset)
3: STOP (own initialization)
4: STOP (internal)
5: Start-up (cold start)
6: Start-up (cold restart/warm start)
7: Start-up (restart)
9: RUN
9: RUN
10: HALT
11: COUPLING
12: UPDATING
13: DEFECTIVE
14: Troubleshooting
15: Without power
253: Process image enabled in STOP
254: Watchdog
255: Not set
ZINFO2 : Diagnostics address of the master
ZINFO3 : DC State Change
0: DC master out of sync
1: DC slaves out of Sync
0xEC80
Bus error resolved
ZINFO1 : Logical address of the IO system
ZINFO3 : Station number
ZINFO3 : IO system ID
ZINFO3 : System ID DP/PN
0xED10
EtherCAT: Bus failure
VIPA System SLIO
System specific event IDs
HB300 | CPU | 013-CCF0R00 | en | 17-20
259
