VK2-1080(720)BIR3V9F installation guide V2.1
5
1. Description
This manual applies to the VK2-1080BIR3V9F VK2-720BIR3V9F bullet cameras.
The VK2-1080(720)BIR3V9F are fully featured day/night IP bullet cameras with in built IR LEDs to
provide 24/7 full HD images, with a remote zoom and focus set up function
• Installation Steps
Follow these steps to install the VK2-1080(720)BIR3V9F on your local network (LAN):
1. Check the package contents against the list below.
2. Connect the Network Camera. See page 3.
3. Set an IP address. See page 6.
4. Set the password. See page 8.
• Package Component
The system comes with the following components:
• Contents in the installation CD
1. The VK2-1080(720)BIR3V9F
User’s Manual
2.
The SmartManager User’s Manual
3. The VIP2
User’s Manual
4. The SmartManager Installation software
5. The VIP2 Installation software
Note:
Check your package to make sure that you received the complete system, including all
components shown above.
• Connection Cable
NO
Wire Colour
Description
1
Red: DC12V
White: GND
Main Power, 2pin terminal, DC12V 700mA(8.4W),
Note:
internal heater does not operate when using PoE, the
camera needs to be powered by external 12Vdc for heater
to operate.
2
Black
Ethernet,
RJ-45 port compatible with 10/100Mbps having PoE
functionality.
Modular Jack