VK2-1080(720)BIR3V9F installation guide V2.1
14
3.6 Resetting to the factory default settings
To reset the VK2-1080(720)BIR3V9F to the original factory settings, go to the Setup>System
>Maintenance
web page (described in “3.5.6 System>Maintenance” of the User’s Manual) or use the
Reset button on the network camera, as described below:
Follow the instructions below to reset the VK2-1080BIR3V9Fto the factory default settings using the
Reset button.
1. Switch off the VK2-1080(720)BIR3V9F by disconnecting the power adapter.
2. Remove the rear cap of the camera.
3. Press and hold the Reset button with a straightened paperclip while reconnecting the power.
3. Keep the Reset button pressed for about 5 seconds.
4. Release the Reset button.
5. The VK2-1080(720)BIR3V9F resets to factory defaults and restarts after completing the
factory
reset.
6.
Replace the rear cap of the camera.
CAUTION:
When performing a Factory Reset, you will lose any settings you have saved.
3.7 More Information
For more information, please see the VK2-1080(720)BIR3V9F
User’s Manual, which is available on
the CD included in this package.