Vip-Vision ACCON Series Installation Manual Download Page 5

Visit 

www.vip-vision.com

 for full user manual and support

5

1.3 VIP Vision Access Control Range

Component

Image

Access Controllers

•  Supports up to 100,000 NFC cards & stores up to 150,000 

events

•  Supports high security NFC IC cards (13.56MHz)
• 

Supports NFC card readers, keypads, fingerprint readers and 

combinations

•  Supports Wiegand or RS-485 interface to NFC card readers, 

keypads & fingerprint readers* (up to 4 doors)

•  Intelligent functions: First card unlock, Multi-card unlock, Anti-

pass back, Inter door lock, Remote verification

•  Supports up to 128 normal, period and holiday schedules
•  Door unlock push button inputs
•  Door open/close status sensing inputs
•  External alarm input(s)
•  External alarm output(s)
•  Internal alarms: Door time out alarm, intrusion alarm, duress 

alarm and tamper alarm

•  Emergency features: All doors lock/unlock by two clicks
•  RTC (Real Time Clock) battery backup

Finge RFID Card Reader

ACRDR-2SFC

•  Supports RS-485 protocol
•  RFID IC card (Mifare)
• 

Supports cards and fingerprints

•  Blue backlight
•  Buzzer and Dual Colour LED indicator

Vandal-Proof RFID Card Reader 

ACRDR-2MKC

•  Supports RS485 and Wiegand34 protocol
•  RFID IC card (Mifare)
•  Metal buttons with blue backlight
•  LED indicator

Touch RFID Card Reader 

ACRDR-2LKC

•  Supports RS485 and Wiegand34 protocol
•  RFID IC card (Mifare)
•  Sensitive touch keypad with blue backlight
•  Buzzer and Dual Colour LED indicator

Continued on next page

Summary of Contents for ACCON Series

















































Reviews: