Service and Maintenance
Version: F
Field: Service Documents
Number : MK- 028
Page 15 of 23
Subject: Pristine Service Manual
Figure 12. System Pipes and connections
6.
Replacing Parts
In this section you will find replacement instructions to the system’s different components and parts. For
safe and efficient service please follow the instructions below.
6.1.
Replacing the fuse
-
Each system arrives with 2 fuses (one in use and a spare one).
-
Both fuses are stored in the fuse house located in the electrical inlet at the back of the system.
-
To access the fuses pull out the fuse house and expose the filters (figure 13).
-
To replace the fuse, simply pull out the fuse in use and replace with the provided fuse.
Figure 13. Locating the fuse house
6.2.
Replacing the electrical inlet
-
Disconnect the internal wires that are connected to the inlet from the inside of the system.
-
Unscrew two black screws from the outside of the system securing the inlet in place.
Replace the inlet with a new one.
-
Replace the two black screws and reconnect internal wires.
Spare Fuse
Fuse in
operation