4
Installation Instructions
1. Connect the power cord, and collect the redundant cable.
2. Place the charging sock against a wall, and connect the
power supply.
3. Startup and charge.
Long press
for 3s; the indicator light on the robot comes
on, connect the robot to the charging dock for charging.
* In case of low battery, it is possible that the robot cannot start up or shut
down. Please directly connect the robot to the charging dock.
* The robot will start up automatically after connection to the charging dock
.
* The robot cannot shut down while it is connected to the charging dock.
Blue light remains on: Startup finished / working normally
/ charging finished
Yellow light breathes: Charging
Red light blinks: Abnormal state
>1.5m
>0.5m
>0.5m
* Please put the redundant cable into the cable slot at the bottom
of the charging dock, otherwise the cable may be dragged and
disconnect power supply to the charging dock.
* Please ensure a space of at least 0.5m on both the left and right
sides of the charging dock, and a space of at least 1.5m in front of it;
* Do not expose the charging dock to direct sunlight.
Summary of Contents for V-RVCLM21B
Page 18: ...www viomi com ...
