9
Routine Maintenance
HEPA Component
Follow the figure to remove the HEPA component and clean it.
Rolling Brush
1. Turn over the lower clip to remove the cover for the middle motor;
2. Take out the rolling rush and clean the bearing;
3. Clean the rolling brush;
4. Reinstall the rolling brush and fasten the clip of the cover.
Note: Replace the rolling brush every 6-12 months to ensure the cleaning
effect.
Side Brush
Remove and clean the side brush regularly.
Boundary Sensor
Clean the boundary sensor with soft cloth regularly
■
■
■
Cover for middle motor
Clip
Rolling brush
Bearing
Boundary sensor
Replace the HEPA component every three months as it is
notwashable;
Clean the HEPA component with cleaning brush regularly
to avoid blockage;
Replace the side brush every three months to ensure the
cleaning effect.
Summary of Contents for V-RVCLM21B
Page 18: ...www viomi com ...
