9
INSTALLING THE HANDLE
IMPORTANT:
Do not overtighten the screws & do
not use power tools to install the handle.
DESIGN 1
–
1
2
3
Locate the handle
○
1 over the fixing pins
○
3 of the
door and using the supplied allen key, tighten the
securing grub screws
○
2 to fix the handle.
USE ATTENTION
Only store wine in unopened bottles. Always lay
bottles on their side for storage.
Do not overload the cabinet.
Do not open the door unless necessary.
Do not cover shelves with aluminum foil or any
other shelf material which may prevent air
circulation.
Should the unit be left empty for long periods it
is suggested that the appliance is unplugged,
and after careful cleaning, leave the door ajar to
allow air to circulate inside the cabinet in order
to avoid possible condensation, mold or odours
forming.
OPERATING YOUR
APPLIANCE
This appliance is designed for operation at certain
ambient temperatures. The climate class is
specified on the rating plate.
The appliance may not work properly if it is left for a
long period at a temperature outside the specified
range. For example, placing your unit in extreme
cold or hot conditions may cause interior
temperatures to fluctuate. The range between 5ºC
and 22ºC (41ºF and 72ºF) may not be reached.
Climate class
Ambient room temperatures
ST
+18°C to +38°C
NOTE:
Units with no heater will not raise its
internal temperature if the ambient temperature
where the unit is located is lower than the set
temperature.
Summary of Contents for VZ07BI
Page 1: ...Wine Cellar User Manual ...
Page 18: ...18 ...