Vinvautz VZ07BI, User Manual

Page: 17 / 18

17
Vibrations.

The appliance is not properly level.

Level the appliance with the
adjustable feet.
The appliance
seems to make too
much noise.
The rattling noise may come from the flow of the refrigerant, which is normal. As each
cycle ends, you may hear gurgling sounds caused by the flow of refrigerant in your
appliance.
If temperature fluctuations occur, the contraction and expansion of the inner walls may
cause popping and cracking noises.

The appliance is not properly level.

Level the appliance with the
adjustable feet.
The door will not
close properly.

The appliance is not properly level.

The door was reversed and not properly
installed.

The gasket is dirty.

The shelves are out of position.

Level the appliance with the
adjustable feet.

Check the door hinge and
reassemble correctly.

Clean the door gasket.

Check the shelves and refit
correctly.
Display
“E1”. “E2”,
“E3”, “E4”, “E5”.

“E1” or “E2” indicates that the air
temperature sensor is failed.

“E3” or “E4” indicates that the defrost
sensor in the evaporator is failed.

E5
” indicates the defrost heater failure.

Call for service.
The icon
“--” is lit
up and flashing in
the temperature
display.

The display temperature is out of the range.

Only temperatures within the
range 0~99°F/-9~37°C the
appliance can display will be
shown. If the temperature is not
within this range, the icon
“--” will
be displayed instead. That is
normal.