101
Assembly - earlier clamps
13
Install the bottom clamp as follows:
13.1 Apply white bearing grease to the cam surface of the cam moulding
and the washer
.
and the lower clamp
assembly
in the bottom clamp moulding
14
Install the oval leg as follows:
14.1 Insert the oval leg
in the bottom clamp moulding
, taking care not to damage the surface
of the lower clamp assembly
.
14.2 Position the T-piece buffer
and secure with screw
14.3 Refit the screw cover
.
15
Install the clamp knob as follows:
15.1 Position the clamp knob
on the bottom clamp shaft
and turn the knob counter-clockwise
to the ‘OFF’ position.
15.2 Install the adjusting grubscrew
in the bottom clamp shaft
16
Adjust the clamp.
Summary of Contents for Vision Pozi-Loc
Page 1: ...Contents Vinten Camera Control Solutions Next Page Previous View Vision Pozi Loc Tripods ...
Page 8: ...8 Contents Previous Page First Page Next Page Previous View Part 1 Illustrated Parts Lists ...
Page 85: ...85 Contents Previous Page First Page Next Page Previous View Part 2 Repairs ...