Vision AS range of Pan and Tilt Heads
20
Remove the 3/8 in. camera mounting screws (17) from the camera slide plate (16) (if not
already done) and place them into the camera storage compartment (18). Secure the
compartment cover by pressing the cover downwards.
Mount the 1/4 in. screw and pin adaptor (19) onto the top of the camera slide plate (16)
with the 1/4 in. camera mounting screw from under the slide plate (Fig. 7).
Fig. 6 Camera screw storage compartment
Fig. 7 Fitting the 1/4 in. pin adaptor assembly
(19)
(18)
(17)