Operators Guide
19
Mounting the camera using the 1/4 in. screw and pin adaptor
A 1/4 in. screw and pin adaptor, comprising a 1/4 in. locating pin on a plate and a 1/4 in. camera
mounting screw, is stored in the camera storage compartment (18) on right-hand side of the
camera mounting platform. The process of mounting the camera onto the head is the same as
described in Mounting the camera using 3/8 in. camera mounting screws on page 17.
To mount the camera onto the head:
Remove the camera slide plate (16) from the head (Fig. 3). Turn the slide plate clamp
(13) approximately 1/2 a turn in a counter-clockwise direction to release the clamp. Then
push the slide lock release (14) in a forwards direction to release and eject the slide plate
(16). When released, the camera slide plate (16) can be lifted upwards and removed
from the head.
Open the camera storage compartment (18) by lifting the cover upwards and remove
the 1/4 in. screw and pin adaptor (19) (Fig. 6).
Fig. 5 Mounting the camera onto the head
1
2
13
13
1
2
13
13
A
B
13