Operators Guide
17
Mounting the camera using 3/8 in. camera mounting screws
The camera slide plate (16) is secured to the base of the camera using either two 3/8 in. camera
screws or a 1/4 in. screw pin adaptor (see Mounting the camera using the 1/4 in. screw and
pin adaptor on page 19).
To mount the camera onto the head:
Remove the camera slide plate (16) from the head (Fig. 3). Turn the slide plate clamp
(13) approximately 1/2 a turn in a counter-clockwise direction to release the clamp. Then
push the slide lock release (14) in a forwards direction to release and eject the slide plate
(16). When released, the camera slide plate (16) can be lifted upwards and removed
from the head.
Fig. 3 Removing the camera slide plate
(13)
(14)
(16)