24
Refit the clamp sleeves by aligning the lugs on the sleeves
(11.6)
with the cut-outs in the
clamp housing
(11.5)
and sliding them down the legs.
Rotate the clamp sleeves outwards so that the lugs on the sleeves locate in the cut-outs in
the clamp housing.
Position the clamp plate
(11.2)
in the clamp housing
(11.5)
, ensuring the lugs on the clamp
sleeves
(11.6)
are correctly located.
Position the spherical clamp nut
(11.4)
in the clamp plate
(11.2)
, ensuring that the curved
face of the nut is towards the clamp plate.
Screw the knob
(11)
into the spherical clamp nut
(11.4)
until the clamp is finger-tight.
Fit the retaining screw
(11.3)
.
Clamp Sleeves
(11.6)
(11)
(11.5)
(11.4)
(11.3)
(11.1)
(11.2)
Summary of Contents for HDT Heavy-Duty
Page 1: ...Vinten Camera Control Solutions Operators Guide HDT Heavy Duty Tripod Range ...
Page 7: ...7 HDT 1 Tripod 1 2 3 4 6 5 7 8 9 10 11 6 5 1 5 2 5 3 5 4 12 ...
Page 9: ...9 14 Four bolt head fixing 15 Elevation handle 16 On shot clamp Elevation unit 14 15 16 ...
Page 17: ...17 Installing or Removing the Elevation Unit 8 12 13 1 8 1 12 2 12 3 13 2 13 13 3 12 1 ...