Vinteck
TB10MKII – TB5 –True-bypass MIDI pedalboard
pag.11
Edizione 02 rev.1
OUT CHANNELS
Following the previuos selection (UP for 3 seconds and IN CHANNELselectino) press one more time UP
Will appare a little “o” followed by a number (1-16) of MIDI in channel
Press DOWN to change in sequence the channel from 1 to 16.
PROGRAM CHANGE 0-119 : 1-120
Following the previuos selection (UP for 3 seconds and IN CHANNELselectino) press one more time UP (for the
2
nd
time) after “i” and “o” will appare a little “c” followed by (select the choosed one with DOWN button:
0= program change 0-119
1= program change 1-120
Pressing one more time UP the function will be closed.
NOTA: MIDI IN and MIDI OUT are in configuration “throw”. Any segnal received by TB10MKII – TB5 will be
transimtted from OUT even if is a command not used by TB10MKII – TB5 (in ex. a command on a channel not
setted on TB10).
7-Spare parts
Codice
descrizione
TB10S7
Pulsant
TB10BF
Buffer integrated circuit
TB10MKIIFT
MIDI line protection
TB10MKIIMICRO
Main program processor
TB5PWSY
Alimentatore esterno TB5
TB10MKIICOM
Boards communications micro
8-
warranty terms and conditions
TB10KMII, TB10LT and TB5 are covered of total warranty of 2 (two) years from purchase.
Warranty operation will be performed only at our factory in Torino.
Shipping cost are charged to customers
All operation and any spare parts are covered by warranty.
Warranty do not cover the folling cases:
-
Uncured utilization
-
Damage from transportations
-
Repairing and changes made without autorization
-
Athmosferic Events
-
Incorrect use of instruments
-
Power supplì not correct
-
Use of not original spare parts
-
Partial or total non-observance of the instructions;
-
Use of the machine against national specific laws.;
-
Calamity and unusual events.
9 support
Any informations about “how to use” or any technical problems may be send by email to:
