Vintage Model Co 702785155554, Manual, Page: 23 / 40

23
Tiger Moth
OIL TANK
1) Identify and remove parts from the laser cut
sheets: OT1 AND OT2 .
2) Make up the oil tank as shown on the plan,
sanding it to the correct profile.
REMAINING PARTS FOR USE
IN THE ASSEMBLY OF THE MODEL
After all of the previous building steps have been
completed, there should be the following parts left
on the laser cut sheets: 2 off each IS1, IS2, LG1,
and optional strake pieces STR . Remove these
parts from the sheets and set them aside ready for
use in the assembly of the model after covering.
VMC Instruction Booklet - Tiger Moth JAN19.indd 23 19/01/2019 12:26