18
www.vintageair.com
905458 REV E 07/10/18, PG 18 OF 29
A/C & Heater Hose Installation,
V-8 Engines (Final)
1.
2.
3.
4.
5.
Using a properly lubricated O-ring, connect the #6 A/C hose to the #6 condenser hardline (See Photo 1, below,
and Figure 1, Page 9).
Using a properly lubricated O-ring, connect the #10 A/C hose to the compressor (See Photo 2, below, and
Figure 1, Page 9).
Using a properly lubricated O-ring, connect the straight fitting on the #8 A/C hose to the #8 hardline from the
condenser. Connect the 135° fitting to the compressor (See Photo 2, below, and Figure 1, Page 9).
Connect the heater hose from the heater control valve to the intake manifold. Secure with a hose clamp (See
Photo 2, below).
Connect the remaining heater hose to the water pump. Secure with a hose clamp (See Photo 2, below).
Photo 1
Photo 2
#6 A/C Hose
Heater Hose
from Manifold
Heater Hose to
Water Pump
NOTE: Vintage Air systems require (2) 5/8” hose nipples (Not Supplied).
#8 A/C Hose
Summary of Contents for 754562
Page 29: ......
