15
www.vintageair.com
905458 REV E 07/10/18, PG 15 OF 29
Control Panel/
Louver Bezel Assembly Installation
1.
Before attaching the dash bracket to the dash, install the control panel/louver bezel assembly.
A.
Locate the (2) OEM 5/16” bolts under the far passenger side of the dash. Remove the inner 5/16” bolt
(retain).
NOTE: This bolt will be reinstalled through the louver bezel in Step D, below. The bezel
has a clearance hole for the outer bolt.
B.
Align the predrilled holes on the louver bezel with the (2) OEM mounting holes under the dash.
C.
Secure the control panel/louver bezel assembly under the dash using (2) 10-32 x 3/4” pan head screws,
(4) 3/16” flat washers and (2) 10-32 nuts with star washers (See Photos 1 & 2, below).
D.
Reinstall the 5/16” bolt that was removed in Step A, above (See Photo 3, below).
E.
Insert the louvers into the louver bezel.
10-32 x 3/4” Pan Head Screw, (2) 3/16” Flat
Washers, and 10-32 Nut with Star Washer
10-32 x 3/4” Pan Head Screw, (2) 3/16” Flat
Washers, and 10-32 Nut with Star Washer
Remove Inner 5/16” Bolt and Reuse to
Mount Control Panel/Louver Bezel Assembly
Photo 1
Photo 2
Photo 3
Summary of Contents for 754562
Page 29: ......
