15
www.vintageair.com
901236 REV B 06/30/2014, PG 15 OF 23
(3)#10 X 1/2”
Hex Sheet
Metal Screws
1.
Place driver side louver housing under dash. Mark and drill (2) 9/64” holes as shown in Figure 14, below.
2.
Secure louver housing to dash using (2) #10 x 1/2” hex sheet metal screws as shown in Figure 14, below.
3.
Install louver into housing as shown in Figure 14a, below.
Center/Passenger
Side Under Dash
Louver Housing
496128
Figure 15
Driver Side
Under Dash Louver Installation
1.
Place center/passenger side louver housing under dash. Mark and drill (3) 9/64” holes as shown in Figure 15,
below.
2.
Secure louver housing to dash using (3) #10 x 1/2” hex sheet metal screws as shown in Figure 15, below.
3.
Install louver into housing as shown in Figure 15a, below.
Center/Passenger Side
Under Dash Louver Installation
Drill
(3) 9/64”
Holes
(2) #10 X 1/2”
Hex Sheet
Metal Screws
Drill
(2) 9/64”
Holes
Figure 14
Figure 14a
Louver
49325-VUL
Figure 15a
Louver
(3) 49325-VUL
Driver Side
Under Dash
Louver Housing
496121
Summary of Contents for 571060
Page 23: ......
