9
EVAPORATOR INSTALLATION CONT.
FIRST ATTACH DRIVER SIDE MOUNTING BRACKET IN OEM HOLE IN RADIO BRACKET USING
OEM SCREW AS SHOWN IN FIGURE 8A BELOW.
RAISE THE EVAPORATOR UNIT UP UNDER THE DASH AND ALIGN THE JACK-NUT IN THE
EVAPORATOR UNIT WITH THE OEM HOLE IN FIREWALL (SEE FIGURE 5, PAGE 7). SECURE
USING A 1/4 x 1” HEX BOLT FROM THE ENGINE COMPARTMENT SIDE. SEE FIGURE 8B BELOW.
ATTACH THE BLOWER HOUSING MOUNT BRACKET IN FRONT OF THE VENT DUCT COVER ON
THE PASSENGER SIDE OF THE DASH, SECURE USING OEM BOLT. SEE FIGURE 8C BELOW.
FIGURE 8
FIGURE 8A
FIGURE 8C
DRIVER SIDE
MOUNTING
BRACKET
RADIO
BRACKET
EVAPORATOR
EVAPORATOR
BLOWER
HOUSING
BRACKET
FRESH AIR
COVER
OEM
SCREW
1969 CAMARO
w/o FACTORY AIR
905070-VCZ-A
, 69 CAMARO w/o FAC. AIR INSTRUCTIONS PG 9 OF 20
11/22/05
FIGURE 8B
FLAT
WASHER
1/4 x 1”
HEX BOLT
#6 HARDLINE
(091692-FCL
OEM
FIREWALL
HOLE
