10
901182 REV A 6/13/11, INST 81-87 CHEV P-UP wo AC EVAP KIT PG 10 OF 27
BRACKET & EVAPORATOR HARDLINE INSTALLATION
ON A WORK BENCH INSTALL EVAPORATOR REAR BRACKET USING (4) 1/4-20 x 1/2” HEX BOLTS.
(SEE FIGURE 8, PAGE 11)
INSTALL #6 EVAP HARDLINE AND (2) HEATER HARDLINES WITH PROPERLY LUBRICATED O-RINGS.
(SEE FIGURE 8, PAGE 11 AND FIGURE 11, PAGE 13.)
INSTALL EVAPORATOR FRONT BRACKET ON EVAPORATOR USING (2)1/4-20 x 1/2” HEX BOLTS AND
TIGHTEN AS SHOWN IN FIGURE 7 BELOW.
FIGURE 7
EVAP FRONT
BRKT
644087
(2)1/4-20 x ½”
HEX BOLT
