18
901182 REV A 6/13/11, INST 81-87 CHEV P-UP wo AC EVAP KIT PG 18 OF 27
GLOVE BOX MODIFICATION
USE GLOVE BOX MODIFICATION TEMPLATE PROVIDED ON PAGE 26.
PLACE TEMPLATE ON THE OUTSIDE OF THE GLOVE BOX. MARK THE OUTSIDE OF THE GLOVE BOX ALONG
THE FRONT OF THE TEMPLATE AS SHOWN IN FIGURE 17 BELOW.
PLACE THE SAME TEMPLATE ON THE OUTSIDE OF THE GLOVE BOX ON THE OPPOSITE SIDE. MARK THE OUTSIDE
OF THE GLOVE BOX ALONG THE FRONT OF THE TEMPLATE AS SHOWN BELOW.
MARK THE BOTTOM OF THE BOX CONNECTING EACH END OF TEMPLATE.
CUT THE BOX ON THE LINES YOU HAVE MARKED. DISCARD THE FRONT PORTION OF THE BOX.
INSTALL THE NEW SUPPLIED GLOVE BOX BY PRESSING THE S-CLIPS ONTO THE OEM PORTION OF THE BOX.
AS SHOWN IN FIGURE 17a BELOW.
OEM wo AC
GLOVE BOX
MODIFIED GLOVE
BOX
DISCARD FRONT
PORTION OF
BOX
FACTORY AIR
GLOVE BOX
TEMPLATE
CUT BOX WITH A
HACK SAW BLADE
ON THESE THREE
FRONT LINES ONLY
OEM wo AC
GLOVE BOX
DISCARD FRONT
PORTION OF
BOX
FACTORY AIR
GLOVE BOX
TEMPLATE
CUT BOX WITH A
HACK SAW BLADE
ON THESE THREE
FRONT LINES ONLY
FIGURE 17
FIGURE 17a
