5
www.vintageair.com
901345 REV A 05/12/17, PG 5 OF 12
Core Support Measurements
This kit was developed based on the measurements below, which were taken
from a 1969 Dodge Charger core support.
This modification was developed based on the measurements below, which were taken
from a 1969 Dodge Coronet without factory air, with a 318 engine core support.
Front View
Front View
Drill 5/16”
Hole
Drill 5/16”
Hole
25 ⅞”
29 ¾”
29 ¾”
22”
6”
6”
29 ¾”
13 ¼”
13 ¼”
18 ½”
1
7 ¼”
15
”
29 ¾”
