11
www.vintageair.com
901345 REV A 05/12/17, PG 11 OF 12
Securing Hardlines
Final Steps
1.
1.
Install a #2 Adel clamp onto the #6 drier/core hardline, and a #4 Adel clamp onto the #8 condenser hardline.
Using the OEM hole on the top of the core support, install a 10-32 x 3/4” pan head screw and a 10-32 nut with
star washer to secure the hardline as shown in Photo 14, below.
NOTE: Some core supports may not have
the OEM hole. In this case, measure 1” from the edge (See Photo 14, below), and drill a 3/16” hole
through the top of the core support.
Reinstall and/or reconnect all remaining items removed or disconnected in the Engine Compartment
Disassembly instructions on Page 6. This concludes the condenser kit portion of your installation.
#6 Drier/Core
Hardline
100999
#8 Condenser
Hardline
101002
#8 Condenser
Hardline
101002
#6 Drier/Core
Hardline
100999
#2 Adel Clamp
Core Support
Measure 1”
From the Edge
#4 Adel Clamp
10-32 x 3/4”
Pan Head Screw
&
10-32 Nut with
Star Washer
Photo 14
