background image

 

Device Menu Overview 

 

This system comes with many features that can be accessed/adjusted by various functions and 
settings within the operation menu. Please see the detailed descriptions below: 
 

1. 

Copy 

This process will copy the source hard drive, which is inserted into the Source Port, onto 
one or multiple target hard drives simultaneously. 

 

2. 

Copy+Compare 

This function performs the Copy process, after which, it will perform a Compare process 
automatically to ensure data accuracy. 

 

3. 

Erase 

This function erases the hard drives(s) connected to any port other than the Source Port. 
There are three options for this function: 

 

Quick Erase: It will erase only the beginning section of the hard drive, which is just 
enough to make it look empty.

 

 

 

Full Erase: It will erase the entire hard drive by writing 0’s throughout. The erase 
timeframe varies depending on the data capacity of the hard drive. 

 

 

DOD Erase: It will erase the hard drive thoroughly to avoid any possible chances 
of recovery. User will be prompted for # of passes to perform, the more pass rounds 
selected, the lower the risk of data contents being recovered, but also the longer 
the time the process will take.  

 

4. 

Copy Mode 

This setting will allow for the selection of a Copy Mode. There are 3 options: 

 

Smart:  This  mode  is  the  recommended  and fastest  approach  to making  copies 
since it will analyze the source hard drive on supported file systems (FAT16/32, 
NTFS, exFAT, ext2/3/4) and copy only the area that contains data. If the file system 
on the source hard drive is NOT being supported, the system will automatically 
shifts to RAW mode. 

 

 

RAW: This mode is the safest and slowest approach to making copies since it will 
copy the entire source hard drive bit by bit. 

 

5. 

Setup 

1) 

Language 

This setting will allow you to choose the display language of the system. 
 

2) 

Buzzer 

This setting will allow the choice to hear a beep sound when a button is pressed 
or when a task has been completed. 

 

 

 

Summary of Contents for HDDMINI






Reviews: