8
8
W W W . V I N O T E M P . C O M
Plug the appliance into an exclusive, properly installed-grounded
115 volt wall outlet. Do not under any circumstances cut or remove
the third (ground) prong from the power cord.
Any questions concerning power and/or grounding should be
directed toward a certified electrician or a service center authorized
by VINOTEMP.
Venting
Proper ventilation must be maintained in order to insure the proper
function and reliability of the unit.
There are vents and openings strategically located on the wood
cabinet in order to insure air flow. Do not block these areas or
modify the cabinet under any circumstance.
Do not overfill your wine cellar for proper internal air circulation.
OPERATING INSTRUCTIONS
Temperature adjustment
The temperature inside the wine cooler can be adjusted between
Min and Max settings using the rotary switch located on the upper
corners of each zone in the cooler casing.
The actual cabinet temperature in a thermal electric unit is
dependent on the ambient room temperature. When the ambient
temperature is below the set temperature the wine cooler will not
operate until the ambient temperature increases to higher than the
set temperature
Interior light
There are lights located inside the cooler for your viewing
convenience. Light switches will activate the lights.
Under normal operation, it is best or the light to remain off.
Important:
When using the wine cellar for the first time, allow at least
24 hours for the internal temperature to adjust properly. Make sure at
least three to five bottles are in the unit.
