1
0
10
W W W . V I N O T E M P . C O M
TROUBLESHOOTING GUIDE
You can solve many common wine cellar problems easily, saving you the
cost of a possible service call. Try the suggestions below to see if you can
solve the problem before contacting Vinotemp at [email protected].
PROBLEM
POSSIBLE CAUSE
Appliance does
not operate.
Unit is not plugged in.
There is no power at the wall outlet.
The circuit breaker tripped or a blown fuse.
The cooler is not turned on.
Wine is too
warm.
Check the temperature control setting for each
zone. Adjust to a colder setting if needed.
External environment may be too warm.
The door has been opened frequently.
Wine bottles were recently added, allow enough
time for wine to reach desired temperature.
The door gaskets do not seal properly.
Wine is too cold.
Check the temperature control setting for each
zone. Adjust to a warmer setting if needed.
Moisture builds
up on coolers
interior or
exterior.
This is normal during humidity periods.
Door has been opened for long periods of time.
Door has been opened frequently.
Door gaskets do not seal properly.
The doors won’t
close properly
The appliance is not level.
The door magnetic seal is dirty.
The shelves are out of position.
Wine bottles inside the unit are too long.
