Vingtor Stentofon 1021001100, Installation & User Manual

Page: 25 / 32

25
VSS-V2 Technical Manual
A100K11209 v.1.4
9 Reverse LED function
9.1 Updated VSS-MP & VSS-SP firmware
The advantage of the firmware is a reverse LED indication mode. In
this mode normal direction of LED indication will be reversed by 180
degrees. Mode is activated by a switch.
9.2 DIP switch S1
S1/4: Dipswitch on / off
S1/2: Reverse LED function
When in reverse mode normal LED indication position will be flipped
180 degrees.
9.3 Description
This firm ware is for both panels VSS-MP and VSS-SP. This function
can be useful if panel is mounted in vessels aft direction or vessel is a
double-ended ferry. In a setup one panel can be in normal mode while
the other is set to reverse mode. Mode is changed by dip-switch on
PCBs at installation if function is needed.
A new item, VSS-VESSEL, is registered and is a label which is ordered
separately and is to be mounted at installation if reverse symbol of
vessel is needed.
See next pages examples for use of this item.
Panel is set in reverse mode by activation of PCB dip-switch.
An incoming sound signal is registered at starboard side at the
microphone unit. The panel will make its LED indication at opposite
direction - in this example it will lid port side.