58
Vincent
Audio playback modes (“LISTEN” button)
The SV-122 can accept different types of audio signals. Digital formats can be identified by the receiver and a
suitable playback mode is changed to automatically if the input mode (IN.MODE) is set to “AUTO MODE”.
For all audio formats different playback modes are possible. At one time it could be preferred to listen to stereo
sources using only front speakers and the subwoofer, at another time playback using the whole set of speakers
may seem more attractive. The button „
LISTEN
“ at the front panel (3) or on the remote control (37) as well as the
buttons (34) serve to choose the audio playback mode.
Bear in mind that the subwoofer will always have a signal if it is activated in the „
SPEAKER
“ menu.
If one of the stereo analog inputs (CD, AUX1, AUX2, TUNER) is selected, you can use the button „
LISTEN
”
(3)(37) to enable the desired playback mode.
If one of the digital inputs (“
OPTICAL
” or “
COAXIAL
” (14)) is selected, the following playback modes are
optional by pressing the button „
LISTEN
” (3)(37):
(A)
If the signal received is PCM Stereo, you can choose from the following:
(B)
If the input source receives a Dolby Digital signal, the following playback modes are available::
(C)
If the input source receives a dts signal, the following playback modes are available:
The following table summarizes for every audio format which speaker channels are active and what conditions
have to be met for them to be available.
* Channel active, (*) Channel active if corresponding speaker has been made available in the „SPEAKER“ menu, - - Channel inactive
If „5.1 CH INPUT“ has been selected, these settings can not be changed. In this case, the recei-
ver will output those signals that it receives at each channel's input connector.
PROLOGIC STEREO 3-STEREO
PROLOGIC STEREO 3-STEREO
DOLBY DIGITAL STEREO
DTS STEREO
Tonformat
Stereo
3 Stereo
(Stereo with
Centerchannel)
Dolby
Prologic II
(analog multi
channel format)
Dolby Digital 5.1
dts 5.1
Display
STEREO
3 STEREO
PROLOGIC
DB DIG
DTS
Aktive Kanäle
Front
Center-
Surround
Subwoofer
(L+R)
(SR+SL)
(SW)
*
- -
- -
(*)
*
(*)
- -
(*)
*
(*)
(*)
(*)
*
(*)
(*)
(*)
*
(*)
(*)
(*)
Can be cho-
sen when
these input
sources
are selected
all except
„5.1CH“
all except
„5.1CH“
all except
„5.1CH“
„OPT“ and
„COAX“
„OPT“ and
„COAX“
Can be cho-
sen when
these types
of signals
are received
all
all
except
DolbyD
dts
all
except
DolbyD
dts
Dolby Digital
dts
