VINCENT CD-S4, Instructions For Use Manual

Page: 36 / 64

36
Vincent
Operation Button(s) Description
Start and pause play-
back
(5)(21)
PLAY/
PAUSE
This button, both on the front of the device and on the remote control, starts
playing the inserted CD and the symbol “ “ appears on the display (3)
during play. If there is no CD inserted, “NO DISC” appears in the display
and pressing the button has no effect. If the button is pressed again while a
CD is playing, play will be interrupted at the current position. This “PAUSE”
mode is indicated in the display by the symbol “ ”. During the pause the
disc continues to rotate and when the button is pressed play continues from
this position. The “PAUSE” function should only be used for brief interruptions.
Direct selection
of a track Number
keys (17)
You can start playing a track at any time by keying in the track number on
the remote control. For numbers over 10, you must press the “10+” button as
often as necessary until it shows the relevant first figure of the number and
then you key in the second figure. If there is no track of the keyed-in number
on the CD, the player switches to “STOP” mode. If the player is paused, you
cannot select any other track directly with the number buttons.
Stop playback
(6)(23)
STOP
While a CD is being played, pressing this button stops the playing. If the
player was in “PAUSE” mode, this mode will also be ended by pressing the
“STOP” button. The total number of tracks on the CD and the total playing
time appear in the display (3) again. This button is on both the front of the
device and the remote control.
Skip to the following
track
(9)(30)
NEXT
When this button is pressed while the CD is playing, the current track stops
playing and the next track in the sequence begins to play. If this button is
pressed in “STOP” mode, you can choose all the CD tracks one after the
other starting from track 02. Playback can then be started again with the
“PLAY/PAUSE” button (5)(21), with the “STOP” button (6)(23) the player
goes back to “STOP” mode. This button is located both on the front of the
device and on the remote control.
Skip to playback the
previous track (8)(29)
BACK
If this button is pressed once while the CD is playing, the current track stops
and the actual track starts playing from the start again. Further presses skip
to playing the previous tracks in their playing sequence. If this button is
pressed in the “STOP” mode, you can choose all the CD tracks in reverse
order starting with the last track. Playback can then be started again with
the “PLAY/PAUSE” button (5)(21). With the “STOP” button (6)(23) the
player goes back to “STOP” mode. The button is located both on the front
of the device and on the remote control.
PLAYBACK FUNCTIONS
OPERATING THE APPLIANCE