2018-07-09 A10022177 REV.B Page: 12 of 24
The patient end
Thermometer
Heater base
rot
alit
ne
V
Humidifier
Water trap
Water trap
Breathing tube circuit
ret
ae
H
tn
e
me
cal
p
EXP
INSP
5.1.5
Connect the air supply breathing tube to the inlet of the chamber.
5.1.6
Connect the inspiratory limb to the outlet of the chamber
5.1.8
Switch on the ventilator or air-supply equipment.
5.1.9
Plug the power cord to the suitable alternating current socket with
earthing, the power source should have rated power as specified as
per this instruction. Now the humidifier and chamber is ready .
Before use, if you have any questions on how to use the humidifier
properly, please contact Vincent Medical Mfg. Co., Ltd. or your local
supplier.
VHB10A is intended for use in conjunction with gas supply, such as
iVent 201or other ventilator which meets the requirements of IEC 60601-1
and IEC 60601-1-2.
5.1.7
Install the temperature monitoring device (thermometer,
temperature sensor, etc.) to the patient end of the inspiratory limb.
.
