11
D122 FRONT PANEL OPERATOR CONTROLS (cont.)
(Refer to Figure #1)
5. SHUTTER Indicator. This LED indicates that the D122 drive circuit is activated.
6. SYNC. Indicator. Indicates status of Solid State Sync. The green LED is illuminated when shutter's
electronic sync. is activated. This LED functions only if the shutter is equipped with the Solid State
Sync. system.
7. POWER Indicator.
8. POWER Switch.
9. RESET Switch. Resets D122 disabled by interrupts (mode A or mode B) and returns shutter to the
position determined by the N.O/ N.C., or the status of the PULSE input. (The PULSE O/C flip-flop is also
reset. If the shutter had been activated by this input the shutter will close after a reset pulse.)
Please note if an open command is sent to the RS-232 input, a reset from the front panel or RESET
input will clear the RS-232 output and the shutter will close (or return to the state as set by the N.O./N.C.
switch).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
