vimec V 64, Use And Maintenance

Page: 24 / 64

24
a
a
a
c
d
b
a
7511131
The guide shoe of the chain microswitch must always
act on the inner chain as indicated in (Fig. 18bis/i).
N.B.: Do not over-stretch the chain.
- If necessary, use the handwheel for manual operation
to adjust the chain in order to simplify fitting of the
chain stretcher - Fig. 19/a.
- Remove the supporting feet and handles from the
lift body.
7) ASSEMBLING THE PLATFORM WITH DRIVEN
FRONT ACCESS (B.I. - B.R.)
On customer request it is possible to have a footboard
with overturning front side (Fig. 20/a).
Such a footboard permits, on the lower floor only, to
access/go down perpendicularly to the machine.
7.1) Assembling the platform
a)
Remove the top plate from the platform by undoing
the relative screws.
b) Make sure that the two platform supports, fixed by a
wedge and a plastic clamp, are in the assembly position
(Fig. 21/a/b).
FIG.20
FIG.23
FIG.21
FIG.22
FIG.19
7512131