11
HIDDY 350A
EC DECLARATION OF CONFORMITY
(Declaration of incorporation of partly completed machinery annex IIB Directive 2006/42/EC)
No. : ZDT00445.0
The undersigned, representing the following manufacturer
Vimar SpA
Viale Vicenza 14
36063 Marostica VI
Italy
herewith declares that the products
ACTUATORS FOR GATES WITH SWING DOORS - SERIES HIDDY
Articles
HIDDY 350A
are in conformity with the provisions of the following EC directive(s) (including all applicable amendments) and that the
following standards and/or technical specifications have been applied:
LV Directive 2006/95/EC: EN 60335-2-103 (2003) + A11 (2009)
EMC Directive 2004/108/EC:
EN 61000-6-1 (2007), EN 61000-6-3 (2007) + A1 (2011),
EN 61000-6-2 (2005), EN 61000-6-4 (2007) + A1 (2011)
Machinery Directive 2006/42/EC
EN 13241 (2003) + A1 (2011), EN 12453 (2000)
Further hereby declares that the product must not be put into service until the final machinery into which it is to be incor-
porated has been declared in conformity with the provisions of Directive 2006/42/EC, where appropriate.
Declares that the relevant technical documentation has been compiled by Vimar SpA in accordance with part B of Annex
VII of Directive 2006/42/EC and that the following essential requirements of this Directive have been applied and fulfilled:
1.1.1, 1.1.2, 1.1.3, 1.1.5, 1.1.6, 1.2.1, 1.2.2, 1.2.6, 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.7, 1.3.8, 1.3.9, 1.4.1, 1.4.2, 1.5.1, 1.5.2,
1.5.4, 1.5.5, 1.5.6, 1.5.7, 1.5.8, 1.5.9, 1.6.1., 1.6.2, 1.7.1, 1.7.2, 1.7.3, 1.7.4.
I undertake to make available, in response to a reasoned request by the national authorities, any further supporting pro-
duct documents they require.
Marostica, 04/12/2017
The Managing Director
Note: The contents of this declaration correspond to what declared in the last revision of the official declaration available before printing
this manual. The text herein has been re-edited for editorial purposes. A copy of the original declaration can be requested to Vimar SpA.
EN
