Vimar ELVOX 7558, Installation And Operation Manual

Page: 9 / 60

9
TAB: 7558
EN
Key functions
In the subsequent sections of this document the touch keys are designated as shown in the figure below:
C (Access Menu
configuration)
P/A (Answer / End call /
Call to switchboard)
T4 (Stair light)
Lock
T2 (AUX2)
T1 (Self-start)
T3 (Ringtone mute / Mute
microphone)
At rest, none of the buttons perform the touch function, but must be pressed for longer (around 0.4 s): this prevents the
accidental activation of commands. Unless specifically disabled, the recognition notice is given by acoustic signalling.
The T1, T2 and T4 keys have a default (when not programmed), as indicated in the following figure (Table 1), along with
the default icons. The T2 and T4 keys can be programmed from the installer menu or using SaveProg.
KEY ICON MEANING
T1
Self-start
T2 Aux 2
T4 Aux 1
Note: The icons are visible in call/conversation.
T2 (P4 for SaveProg) is not configured by default and controls the second relay (Aux2).
T3 has the function of
ringtone mute
/ mute microphone. The associated LED will operate also as an indicator for:
• Ringtone disabled (the indoor station does not ring for calls from outdoor station or call button 20577, 19577, but
otherwise functions normally). In this case the LED is on steady, while any absent user configuration is eliminated
at the same time.
• Only where configured from SaveProg - User absent (the indoor station rejects the call from an outdoor station
and consequently the call is unsuccessful). In this case the LED flashes at intervals of 0.1 s on and 0.9 s off.
The LED is essential when the display is switched off.
The
C key cannot be programmed and its function is context-dependent.