Vimar ELVOX 7558, Installation And Operation Manual

Page: 10 / 60

10
TAB: 7558
EN
The P/A key is used to answer or close a call / conversation. In standby it calls the porter switchboard, if the
management with switchboard is active. Moreover, where configured with SaveProg as "Enable missed calls", the LED
associated with the
P/A key remains on permanently due to possible calls from the switchboard which were not
answered. Answering the current call causes the LED to switch off once the indoor station has returned to standby mode
(only in the indoor station from which it was answered). If there were unanswered calls from the switchboard, continu-
ously touching the
P/A key for at least 2 s (until the video entryphone emits a tone) causes the missed call from
switchboard status to be reset. The same result can be obtained by also reactivating the ringtone, by making an intercom
call, or by answering a call.
N.B. : the missed call signal remains also in the case of a power outage.
By default, the LOCK key controls the lock of the last outdoor station to make a call or the outdoor station for which
self-start procedure was performed. It can only be programmed using SaveProg. The LED associated with the
LOCK
key indicates door open status of the system, essential when the display is switched of, even if the same key is
programmed for another function. In some states (e.g. conversation) the icon also appears in the top right-hand side
of the screen.
In standby mode, the screen is completely switched off. (In the method described above), by activating any one of the
keys
T1..T4
and
LOCK
by default the function is performed without switching on the display unless the function
has to do so in order to be performed, such as self-start.
Starting with 7558 in default, the
T4 key enables the first relay in the Due Fili system. It is usually indicated as stair
light or Aux1 .