Manuale per il collegamento e l’uso
Installation and operation manual
49400765A0 00 14 06
VIMAR - Marostica - Italy
Vimar SpA: Viale Vicenza, 14
36063 Marostica VI - Italy
Tel. +39 0424 488 600 - Fax (Italia) 0424 488 188
Fax (Export) 0424 488 709
www.vimar.com
Color IR Dome Camera
DESCRIPTION
This IR Dome Camera adopt high sensitivity sensor and advanced circuit design,
the resolution up to 650TVL, support automatic white balance, high S/N Ratio, clear
picture, with the function of color to black automatically, with IR-CUT filter design, easily
have 24 hours day and night.
ATTENTION
Thank you for your purchasing this product. Before attempting to connect or operate this
product, please read these instructions carefully and save this manual for future use.
1. Use the Appropriate Power Supply
Input power for 46822.036B: 12 Vdc.
Be sure to connect it to the appropriate power. Wrong connection may cause
malfunction and/or damage to the video camera.
2. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers. There are no user
serviceable parts inside. Ask a qualified service person for servicing.
3. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be
damaged by improper handling or storage.
4. Do not expose the camera to rain or moisture, or try to operate it in wet areas.
Do not place the camera in the following locations:
1 Locations where temperature is lower than -10°C or higher than 50°C;
2 Locations where humidity is higher than 95%;
3 Locations where there are large amounts of water vapor and steam.
5. Do note use strong or abrasive detergents when cleaning the camera body. Use a
dry cloth to clean the camera when dirty. In case the dirt is hard to remove. Use a
mild detergent and wipe gently.
6. Clean the sensor faceplate with care.
When cleaning the sensor panel, do not use strong or abrasive detergents.
Use a piece of lens tissue or cotton tipped applicator and ethanol.
7. Do not attempt to aim the camera at the sun
Do not attempt to aim the camera at the sun or other extremely bright objects that
causes mear to appear irrespective of whether the camera is operating or not. This
can damage the sensor.
8. Do not put the camera in a place with interference.
When this camera is installed near the equipment like wireless communication
device which emits strong electromagnetic field, some irregularity such as noise on
monitor screen may happen.
FEATURES
Adopt high performance sensor, the image is clear, exquisite
Automatic function from color to B/W
Day and Night Monitoring daytime with enough light, color image, at night, low light,
change to black image automatically to improve the sensitivity and picture quality..
High resolution
Up to 650TVL high resolution.
Auto White Balance
ATW is the cameras' reversion of the white objects, it can adjust the room
temperature and outside temperature.when the temperature change, the human
eye can see that white is white,This is because human eye can adapt to the
changes of the color temperature, but the camera does not perform well equally,
when Light occurs , the white color will change to others after shooting. White
Balance technology can correct this problem.
Long-life IR LEDS Design
High-performance IR LED,whose brightness is
several times higher and service life longer than
an ordinary LED's.
Automatic gain control (AGC)
In order to output standard video signal under different illumination conditions,The
amplifier gain need to adjust automatically in large scope.it can increase the
sensitivity automatically when low light and enhance the signal output to have a
clear bright image.
High S/N Ratio.
More than 48 dB
PARTS INSTRUCTION AND INSTALLATION
1. Affix the Installation instructions to the wall;
a: cement wall: drill a hole according to the stickers position and put the plastic
expansion pipe into this hole;
b: wooden wall: no need drill a hole.
2. Hold the pedestal, clockwise rotate the decorative cover and remove the pedestal.
3. Let base holes align the holes on the wall and use screws to secure the base on
the wall.
4. put the Sphere components into the up cover, then put the decorative covers to this
up case
5. assemble the Sphere components, roof cover and decorative cover, put the whole
into the pedestal, then counterclockwise rotate the decorative covero the first gear
6. This series of camera has a three-axis adjustment function, the direction of this as
shown in the picture
7. finally counterclockwise rotate the decorative cover into the second gear to fix the
sphere, then finish the installation.
DIMENSIONS (MM)
SPECIFICATIONS
Model
46822.036B
Sensor
1/3” High Sensitivity Sensor
video format
PAL/NTSC
resolution
650TVL
Mini-illumination
0.2Lux (IR OFF), 0Lux (IR ON)
S/N Ration
48dB AGC OFF
Electronic-shutter speed
1/100~1/100000
BLC
Auto
AGC
Auto
White Balance
ATW
Day/Night
Auto
Syncronization
Internal
Voltage
DC12V
Current
<160mA
IR-CUT
Auto
Lens
3.6mm
IR range
20meter
Video output
1.0Vp-p/75ohm
Storage temperature
-20°C~50°C
Operate Temperature
-10°C~50°C
Size
70(H)*90(¦)mm
Weight
130g
*Specifications subject to change without notice.
CAUTION
RISk OF ELECTRIC
SHOCk DO NOT OPEN
CAUTION: TO REDUCE THE RISk OF ELECTRIC SHOCk,
DO NOT REMOVE COVER (OR BACk).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL
Long-effective IR Light Source Design
Other brands
Service Life
IR Sensnsitivity
1 yr
2 yr
3 yr
4 yr
Base
Top Cover
Ornament
Cover
Sphere
Components
Horizontal
Vertical
Rotate
Screw
Template
Screw
650 TVL indoor dome IR camera, 3,6 mm lens
46822.036B
Ø 90mm
Ø 75mm
70mm
