Vimar ELVOX 41006, Installer Manual

Page: 10 / 60

EN
Description
Wide-angle teleloop audio video electronic module (41006)
for Pixel Series modular entrance panels, can be used on
systems with IP technology.
Can be installed with all the auxiliary modules of the 41000
series (except for 41016).
The module features:
- hearing-impaired function for hearing aid wearers.
- voice synthesis
- video camera and white LEDs lighting the shooting area
with automatic brightness control according to the ambi-
ent light.
- video camera with zoom&scan mode, can be controlled
directly from the indoor unit;
- two picture control modes, standard and enhanced por-
trait;
- automatic gain control on the power supplied by the
speaker, depending on the type of installation.
- echo canceller.
- light sensor function for automatically adjusting the bright-
ness according to the ambient light.
- four conventional indoor unit call push buttons in two rows
(2+2).
- can manage up to 84 push button calls, using up to 8
additional push button modules 41010.
- command of an electrical lock connected directly to termi-
nals S+ and S-.
- CA+ and CA- terminals for programmable input using
configuration software (eg. lock opening command,
emergency door open warning sensor, command for im-
plementation available in the system).
- standard configurations can be made by using the four
front call push buttons and their four indicator LEDs.
- front LEDs for signalling: call in progress/communication
active; enable lock; missed call.
1.8 m
(83°)
1 m
1,65m 1,20 m
2,6 m (104°)
1 m
H angle (opening
at 1m)
Diagonal angle V angle (opening
at 1m)
104° (2.6m) 129° 83° (1.8m)
Video camera characteristics
Height of installation and field of view.
Technical characteristics
- Power-over-Ethernet Class 0 power supply (IEEE 802.3-
2012).
- Average PoE consumption: 10W
- The maximum current delivered to the additional electron-
ic modules (back panel) is 500mA (maximum 8 additional
modules).
Refer to the additional modules for sizing the load on the
back panel and on the bus.
- Electrical lock output (S+/S-): The entrance panel supplies
a current peak IT>1A for 10ms after which there follows a
maintenance current IM =200mA for the entire duration of
the lock command (see lock time).
- Operating temperature: -25°C / +55°C.
- IP54 degree of protection
- Degree of protection against impact: IK08 (Pixel), IK10
(Pixel Heavy)
The instructions manual can be downloaded
from the website www.vimar.com
10
41006