10
TAB: 40605
EN
Interfaces and terminals
•
PoE
: interface RJ45 Ethernet 10/100 Mbps, PoE class 0.
•
FP
: NO input for dry contact, landing call push button (reference to terminal M).
•
M
: Earth reference for landing push button.
Installation guidelines
:
• The RJ45 network interface is to be connected solely to a SELV (Safety Extra-Low Voltage) network.
• The PoE (Power-over-Ethernet PSE, Power Sourcing Equipment) power supply unit must provide electrical insulation
between any accessible conductor including the earth wire, if there is one, and all the contacts of the network ports, inclu-
ding those not used by the PSE or by the device to be installed.
Fig. 6
Fig. 3