background image

36

6.6 PULSE COUNTER 

From the consumption monitoring menu (chapter 8), tapping the

 Pulse Counter

 icon takes you to the screen for 

viewing and managing the consumption of utilities such as Water, Gas, etc. with:   
- an indication of the overall consumption;
- a bar chart of the consumption or cost in euro subdivided by day/week/month/year; 
Green indicates a value below the average, the intermediate green/orange indicates the last mark before reaching 
the average value, orange a value above the average and the grey background indicates the average.

Indication of average consumption

Total consumption

Consumption histogram

Values   displayed in the consumption 

quantity

• By tapping the 

  icon you can set the type of measurement with which the touch screen shows the data 

(consumption in m

3

, cost in euro); 

• By tapping the  

  icon you can set the time scale (hours, days, weeks, months) for measuring the con-

sumption. 
The quantitative consumption displayed is:

daily

 if the time scale set for the histogram is in hours;

weekly

 if the time scale set for the histogram is in days;

monthly

 if the time scale set for the histogram is in weeks;

yearly

 if the time scale set for the histogram is in months.

• Tapping the 

 icon displays the detailed consumption screens according to the set unit of measurement 

and time scale.

Energy monitoring

Summary of Contents for 14511.1

































































Reviews: