manualshive.com logo in svg

ViM PILOT PARC MASTER Series, Instruction Manual

Share
Download
ViM PILOT PARC MASTER Series Instruction Manual Download Page 6

 

6/32 

NT00000582-PILOT-PARC-MAITRE-AN-200723

3. 

ELECTRICAL CONNECTION

3.1  Power supply 

Three-phase 400V 50/60Hz + Earth, according to current standards.
Connect the power supply phases directly on the switch-disconnector and the earth connection conductor 

on the specific PE connection strip.

• 

If there are ready factory-fitted connections on the switch-disconnector terminals, check that they are 

secured after connecting the power supply.

• 

The cross-section of the conductor connection must be identical from the motor to the first magnetic 

protection encountered upstream (PILOT PARC unit or Low Voltage Main Panel depending on model).

Application of type 1: for an installation in accordance with the regulations, 

it is imperative to install elec-

tromagnetic protection on the power supply to the unit of the following type

:

PILOT PARC versions with 1 Motor 

Rated current of HS 

motor (max A)

Fuse protection

Only magnetic circuit breaker protection

Type

Rating (A)

Type

Rating (A)

3.5

aM 10x38

4

ABB-MO325

4

5.5

6

6.3

11.5

12

12.5

18

20

25

25

32

ABB-MO450

32

32

aM 22x58

40

50

63

65

100

80

125

95

125

115

aM 22x58

125

150

aM T0

160

185

aM T0

200

225

aM T1

250

Shaded cells

 = fuses built into PILOT PARC (labelled F3) Otherwise, protection is installed by the in-

staller.

PILOT PARC versions with 2 Motors

 

Rated current HS motor

(max A)

Protection by fuses built into PILOT PARC (labelled F3 and F4)

Type

Rating (A)

3.5

aM 10x38

4

5.5

6

11.5

12

18

20

25

32

3.2  Motor power output 

Connect the motors phases directly on the corresponding thermal relays and the earth conductor(s) on the 

specific connection provided for this purpose.

For versions controlling one or several Dahlander motors, check the conductors connecting the KME to the 
output of the Rtpv thermal relay once the motor is connected.
Set each thermal relay LS and HS to the corresponding value (s) on the plate of the motor(s) connected.

Summary of Contents for PILOT PARC MASTER Series

































Reviews:

No comments

Brands by name

Popular brands

Load more brands