22
www.villeroy-boch.com // V 1.0 // 27.04.2018 // V0E100R1
6 Expert mode
In addition to the basic functions described, expert mode allows access to further functions via the
remote control.
To activate expert mode, press the two buttons for regulation of the water volume si-
multaneously for at least five seconds.
The LEDs then light up three times indicating that expert mode has been activated.
The following functions and options can be set in expert mode:
6.1 Setting the water temperature
There are five water temperature levels available between 30 °C and 40 °C.
To set the water temperature, proceed as follows:
•
Activate expert mode.
•
To raise the water temperature, press the button to increase the water volume.
•
To lower the water temperature, press the button to reduce the water volume.
For more information on the buttons, see
"Water volume"
.
6.2 Manual cleaning of the shower nozzle
To clean the shower nozzle manually, it must be driven out/in with the remote control.
To move the shower nozzle, proceed as follows:
•
Activate expert mode.
•
Press the button to drive the shower nozzle out.
➯
The shower nozzle drives out of the Quaryl
®
panel.
