Villager VLP 2628, Original Instruction Manual, Page: 14 / 100

3
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be performed.
Use of the power tool for operations different from those intended could result in a
hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for safe handling and control of the tool in
unexpected situations.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
SPECIFIC SAFETY RULES
1. Hold tool by insulated gripping surfaces when performing an operation where the
cutting tool may contact the hidden wirings or its own cord.
Contact with alive wire will
make exposed metal part of the tool alive and shock the operator.
2. Use clamps or another practical way to secure and support the workpiece to a stable
platform.
Holding the workpiece by hand or against your body leaves it unstable and may
lead to loss of control.
3. Do not start the saw with the blade touching any surface. The blade action will bounce
the tool and may cause body injury.
4. Allow the tool to come to a complete stop before putting it down. A running tool will
jerk when the blade tip contacts any surface.
5. Always remove the plug from the mains socket before making any adjustments or
maintenance, including changing the blade.
6. Do not let anyone under the age of 18 years operate this saw.
7. Always stand to one side when operating the saw and allow the blade to come to rest
naturally.
8. Never use a cracked or distorted saw blade. Only use sharp blades.
9. When cutting round wood, use clamps to prevent the work piece from turning on both
sides of the blade.
10. Never use your hands to remove sawdust, chips or waste close by the blade.
11. Rags, cloths, cord and string and the like should never be left around the work area.
12. Avoid cutting nails. Inspect the work piece and remove all nails and other foreign
objects before sawing.
13. Do not attempt to free a jammed blade before first switching off the machine.Do not
slow or stop a blade with a piece of wood or other objects.